|
There are online support button from the blog
if you have any questions.
01/25/12
A small update from us; the latest petrol Mercedes/AMG 2012 models with the
MED17.7.1 & MED17.7.3 are no available for read and write with our Debugger software!
12/12/11
Manufacturer’s warranty for Europe from OBD Tuning/OBD Performance!!
As of now, OBD Tuning/OBD Performance is in a position to perform OptiEco exclusively and
achieve increased performance with manufacturer’s warranty – without any ifs and buts.
We are able to make this offer in major parts of Europe and all of our tunings will now be
delivered with a warranty at no extra charge to our customers. At last, you can be certain to
have your car tuned reliably and without fear and to keep the manufacturer’s warranty in the old form.
Quality and professional work supplied by OBD Tuning has paid off.
To verify this quality, OBD Tuning GmbH will supply a certificate of authenticity.
Qualifications of OBD Tuning/OBD Performance in quality assurance have been certified by
TÜV Technical Inspection Authority (in accordance with DIN 9001) and the same applies to
Bosch (ETAS) as regards vehicle application.
Both qualifications demonstrate their strong technical capabilities.
The manufacturer’s warranty applies in the following European countries:
Belgium • Denmark • Germany • Estonia • Finland • France • Greece • United Kingdom • Ireland •
Iceland • Italy • Liechtenstein • Luxemburg • Malta • Monaco • The Netherlands • Norway •
Austria • Poland • Portugal • Sweden • Switzerland • Spain
Tunings with certificate and manufacturer’s warranty are presently available for the following manufacturers:
AMG • Abarth • Alfa Romeo • Audi • BMW • Bentley • Chrysler • Citroen • DAF • Dodge • Fendt • Ferrari •
Fiat • Ford • GM • Infinity • Honda • Hyundai • Isuzu • Iveco • Jaguar • Jeep • John Deere • Kia • KTM •
Lancia • Lamborghini • Land Rover • Lexus • Lotus • MAN • Maserati • Maybach • Mazda • McLaren • MCC •
Mitsubishi • Mercury • Mercedes Benz • MG • Mini • New Holland • Nissan • Opel • Peugeot • Porsche •
Renault • Saab • Scania • Seat • Skoda • Subaru • Suzuki • Toyota • Volvo • Volvo Penta • Vauxhall • Volkswagen
This also applies to individuals and commercial car pools with vehicles weighing up to 7,49 t.
To check warranty, click here: http://www.obdtuning.de/checkwarranty
With the certificate of authenticity at hand, you will be able to check the product for authenticity and
obtain protection from manipulation attempts.
Our Ts&Cs apply as amended from time to time.
Please also refer to the Ts&Cs applicable to respective manufacturers and countries.
On the new tuning portal, files can be purchased as master and slave.
This is also possible for devices made by other manufacturers. Register here: http://portal.obdtuning.de
As before, individuals can always turn to one of our official support points and have their performance
increased or Economy Tuning (OptiEco) performed.
Your team at OBD Tuning & OBD Performance
09/30/11
We are happy to announce Ford Transit 2,2tdci 2011 model ready for
flashing with tuning software! Contact us for more information.
06/20/11
New in OptiCan Flasher software version 494:
Peugeot Boxer 3.0l HDI 116kw ready for diagnostic read/write
Volvo ME 9.0c ready for diagnostic read/write
VAG MEDC 17 - UDS New CKS, faster and even better than before
VAG EDC15P+ - small changes, faster than before
VAG ME 7.5-1M_2 - faster and even better than before
06/16/11
BREAKING NEWS FROM OBD TUNING
We are happy to announce that we today are launching our new Debugger TproT update for BMW.
Our OptiCan Debugger TproT software is now available for use on BMW ecu’s with TproT level 8.
This update is available for our customer with the latest Debugger TriCore TproT license update.
Brand: BMW
Ecu: EDC17xx PW 8 Read
System: OptiCan Debugger TriCore TproT
05/28/11
New update for OptiCan Debugger:
Iveco EDC 17CP54-4.1
Brand: Iveco Daily IV 3.0l CRD
ECU TYPE: EDC 17CP54-4.1
05/17/11
Update News - Enjoy the Power!
Diagnose Update
Brand: Volvo
Models: S60 (134) / S80 (124) / V70 (135) / XC60 (156) / XC70 (136)
Engine: 2.4l D 151kw
ECU: Bosch EDC 17CP22
Read & Write
System: OptiCan all / FlashBooster PC
Debugger Update
Tuning Protection 8 to 10 (Debugger TproT)
Brand: Audi / Porsche / Seat / Skoda / Volkswagen
Models: all
Engine: all
ECU brand: Bosch
ECU TYP: EDC 17C46 / EDC 17CP24 / EDC 17CP44 / MED 17x /
Read & Write
System: OptiCan all
Debugger Update coming shortly
BMW Tuning Protection 8
Brand: BMW
ECU brand: Bosch
ECU TYP: EDC 17C41 / EDC 17CP45
System: OptiCan all
02/21/11
New driver are ready - make sure you manually update the driver to v2.08.08
This is for all our tools.
Click here for download
02/09/11
We have added a new car/ecu in the Debugger software: the new Land Rover 2,4D 122hp
01/14/11
FLASHBOOSTER PC & Laptop Version - Enjoy the Power!
Is a read and write flasher for use with a computer (PC or laptop).
This FlashBooster version makes the tuning available for the customer at their location.
The tuner will have a cost efficiency flash tool that only needs a computer by the customer and
the tuner can make tuning files that can be flashed as many times as they want on the same
car with the same VIN number – there are NO FLASH LIMITS on this one car.
The system is registered on the customer with the unique VIN number.
Another advantage (beside the cost), is that the FlashBooster system can be online re-activated
for use with another car (new VIN number). This re-activation is done by the tuner in a special
online administration. This means that the system can be used over again on new cars.
Beside these advantages, have we also put in another system in the FlashBooster – the ScanCan
diagnostic tool. This means that the customer may read and clear the error codes on the ecu
before and after a tunefile flash.
We call the new product FlashBooster PC & Laptop Version!
- Small and handy
- A huge range of cars is available to be flashed
- Your own tuning files can be used – fully encoded of course
- Very cost efficiency
- The car owner can flash back to stock anytime
- Read and clear error codes
- Re-activation is possible
- Multiple use per customer
- No limits on file flashes
- Re-usable by the customer without sending the unit back to tuner for activation.
- Limitations on the number of flashes can be set by the tuner – complete flexible.
- OS is Windows XP/ Vista/ 7
Flashing of your car can not be easier!
Contact us for more information!
01/12/11
We are launching a new update for our Flashbooster system within
short time - Stay tuned!
12/21/10
CHRISTMAS NEWS ! New cars for FlashBooster are ready!
Here are the latest new cars for 2010 in the new FlashBooster!
Plug and Play for the car owner! Enjoy the Power!
Per December 2010 - Merry Christmas to all of our customers!
Brand: Audi "NEW"
Models: A3 (8P) / A4 (B8-8K) / A5 / A6 (C6-4F) / Q5 / TT (8J)
Engines : 2.0l TDI CR 88kw
2.0l TDI CR 103kw
2.0l TDI CR 105kw
2.0l TDI CR 125kw
3.0l TDI CR 176kw
ECU: Bosch EDC 17CP14 CAN
Brand: Audi
Models: A3 (8P) / A4 (B7-8E) / A6 (C5-4B) / A6 (C6-4F) / Q7 / S3 (8P)
S4 (B6-8E) / TT (8J) / TTS (8J)
Engines : 1.8l T 118kw
2.0l T 125kw
2.0l T 147kw
2.0l T 162kw
2.0l T 195kw
2.0l T 200kw
4.2l 253kw
4.2l 257kw
ECU: Bosch ME 9.1
Brand: Audi "NEW"
Models: A3 (8P) / A4 (B8-8K) / A5 / TT (8J) / TTS (8J)
Engines: 1.8l T 88kw
1.8l T 118kw
1.8l T 125kw
2.0l T 132kw
2.0l T 147kw
2.0l T 155kw
2.0l T 200kw
ECU: Bosch MED 17.5.0 CAN
Brand: Cadillac "NEW"
Model: BLS
Engines: 2.0l T 129kw/175PS
2.0l T 154kw/209PS
ECU: GMPT Trionic 8
Brand: Mc Laren
Model: SLR
Engine: 5.5l V8 460kw
ECU: Bosch ME 2.8.1
Brand: Mercedes AMG
Models: C 55 (W203) / CL 55 (W215) / CLK 55 (W208) / CLK 55 (W209)
CLS 55 (W219) / E 55 (W210) / E 55 (W211) / G 55 (W463)
ML 55 (W163) / S 55 (W220) / S 55 (W220) / SL 55 (R230)
/ SLK 55 (R171)
Engines: 5.5l 342HP/355HP/362HP/493HP
ECU: Bosch ME 2.8
Brand: Opel "NEW"
Models: Signum/Vectra C
Engines: 2.0l T 125kw/170PS
2.0l T 129kw/175PS
ECU: GMPT Trionic 8
Band: Opel "NEW"
Model: Antara
Engine: 3.2l 167kw/227PS
ECU: Bosch ME 9.6.1
Brand: Saab "NEW"
Model: 9-3
Engines: 1.8l T 110kw/150PS
1.8l T 129kw/175PS
2.0l T 154kw/209PS
ECU: GMPT Trionic 8
Brand: Seat
Model: Leon (1P)
Engine: 2.0l T 147kw
ECU: Bosch ME 9.1
Brand: Seat "NEW"
Models: Altea / Ibiza Cupra (6J) / Leon (1P) / Leon Cupra (1P)
Engines: 1.8l T 118kw
2.0l T 132kw
2.0l T 147kw
2.0l T 177kw
ECU: Bosch MED 17.5.0 CAN
Brand: Skoda "NEW"
Models: Fabia 2 / Octavia RS (1Z) / Superb II (3T) / Yeti
Engines: 1.9l TDI CR 77kw
2.0l TDI CR 81kw
2.0l TDI CR 103kw
2.0l TDI CR 125kw
ECU: Bosch EDC 17CP14 CAN
Brand: Skoda
Model: Octavia RS (1Z)
Engine: 2.0l TSI 147kw
ECU: Bosch ME 9.1
Brand: Skoda "NEW"
Model: Octavia (1Z) / Superb II (3T)
Engine: 1.8l T 118kw
ECU: Bosch MED 17.5.0 CAN
Brand: Volvo "NEW"
Models: C30 / C70 / S40 / S60 / V50 / V70 / S80 / XC60 / XC70
Engines: 2.0l D 110kw/150PS
2.0l D 130kw/177PS
2.4l D 120kw/163PS
2.4l D 151kw/205PS
ECU: Bosch EDC 17CP22
Brand: Volkswagen "NEW"
Models: Bora (1K5) / EOS / Golf (5) / Golf (6) / Jetta (5) / Passat (B6-3C) /
Passat CC (35) / Tiguan / Scirocco
Engines: 2.0l TDI CR 81kw
2.0l TDI CR 100kw
2.0l TDI CR 103kw
2.0l TDI CR 105kw
2.0l TDI CR 125kw
ECU: Bosch EDC 17CP14 CAN
Brand: Volkswagen
Models: EOS / Golf (5) / Golf (6) / Jetta (5) / Passat (B6-3C)
Engines: 2.0l T 147kw
2.0l T 199kw
2.0l T 200kw
3.2l 184kw
ECU: Bosch ME 9.1
Brand: Volkswagen "NEW"
Models: Bora (1K5) / EOS / Golf (6) / Jetta (5) / Passat (B6-3C)
Engines: 2.0l T 147kw
2.0l T 155kw
2.0l T 199kw
ECU: Bosch MED 17.5.0 CAN
12/15/10
New Debugger TriCore update is ready
VAG: Bosch EDC17.5.20, TriCore 1766 Internal , Read/Write
11/30/10
The new FlashBooster has been on the market now for some weeks, and we will now
update the system with new ecu types within the next two weeks. There will be launched
new ecu types that up until now, has not been possible to reprogram. The new update
will blow your minds! Stay Tuned!
Enjoy The Power!
11/23/10
Latest Flasher software version is 491
10/13/10
Flasher version 489 is online - it should be automatically updated.
There is a number of edc17xxxx ecu's that are implemented, also socalled antuning
protected ecus.... ENJOY THE POWER!
09/01/10
BREAKING NEWS!
We at OBD Tuning / OBD Performance, are happy to announce that we have a new flash
product for the consumer market. After a long development time, the first „easy to use“
flash product for the car owner is ready to be launched.
We have seen that many car owners has been searching for a flash product they can use
themselves so they can control when the car is tuned or not. With our new flash prodcut
the owner can flash the tuned file or back to the stock file when they want to!
We call the new product 
The FlashBooster brings „PLUG AND PLAY“ to the chiptuning industry.
FlashBooster specialities:
- Easy to order – we only need information about the car model and the VIN number
- FlashBooster is locked to the car and VIN number it has been ordered for
- No need for a computer
- FlashBooster is small enough to fit in your hand, and since it is „PLUG AND PLAY“,
the car owner just has to insert the FlashBooster to the Diagnostic Port and turn on
the ignition. The rest is done by the FlashBooster!
- The car owner can flash back to stock anytime
- The car owner does not need to visit a tuning company
- The tuning file that is on the FlashBooster is of the very best quality made in
Germany with TÜV certification
- With the FlashBooster it does it not matter where the car owner lives – just go
online and order the FlashBooster and we will send it out within 48 Hours
- The FlashBooster is available with severeal levels of tuning, for example OptiECO tuning
(economy tuning for more miles per gallon), TÜV tuning and Motorsport Tuning
(power tuning for an increase in Horsepower and Torque)
- There is no extra box (blackboxes) mounted in the car
- The car keeps all of its originial security functions and the flash does not
harm the car or ecu in any way
- The car owner keeps the FlashBooster and it can be stoved in the glove
compartment for ease of use
The FlashBooster is one of the first flash products of its kind in the world.
Contact us for more information !
ENJOY THE POWER!
FlashBooster has these options today - more to come the next weeks:
Hersteller Modell Motor Leistung ECU Typ
AMG C 55 (W203) 5.5l 270 kW ME 2.8
AMG CL 55 (W215) 5.5l K 368 kW ME 2.8
AMG CLK 55 (W208) 5.5l 270 kW ME 2.8
AMG CLK 55 (W209) 5.5l 270 kW ME 2.8
AMG CLS 55 (W219) 5.5l K 350 kW ME 2.8
AMG E 55 (W210) 5.5l 260 kW ME 2.8
AMG E 55 (W211) 5.5l K 350 kW ME 2.8
AMG G 55 (W463) 5.5l K 350 kW ME 2.8
AMG ML 55 (W163) 5.5l 255 kW ME 2.8
AMG S 55 (W220) 5.5l 265 kW ME 2.8
AMG S 55 (W220) 5.5l K 368 kW ME 2.8
AMG SL 55 (R230) 5.5l K 368 kW ME 2.8
AMG SLK 55 (R171) 5.5l 265 kW ME 2.8
Mc Laren SLR 5.5l V8 460 kW ME 2.8.1
Audi A3 (8P) 1.8l TFSI 118kw MED 9.1
Audi A3 (8P), A4 (B7-8E),
Audi A3 (8P), A4 (B7-8E),
Audi A6 (C6-4F) 2.0l TFSI 125kw MED 9.1
Audi A6 (C5-4B),
Audi TT (8J) 2.0l TFSI 147kw MED 9.1
Audi Q7 4.2l FSI 257kw MED 9.1
Audi S3 (8P) 2.0l TFSI 195kw MED 9.1
Audi S4 (B7-8E) 4.2l V8 253kw MED 9.1
Audi TTS (8J) 2.0l TFSI 200kw MED 9.1
KTM X-Bow 2.0l TFSI 177kw MED 9.1
Seat Leon (1P) 2.0l TFSI 147kw MED 9.1
Skoda Octavia RS (1Z) 2.0l TFSI 147kw MED 9.1
VW EOS,
VW Passat (B6-3C) 2.0l TFSI 147kw MED 9.1
VW Golf (5) 2.0l TFSI (GTI) 147kw MED 9.1
VW Golf (6) 2.0l TSI (R20) 199kw MED 9.1
VW Jetta (5) 2.0l TFSI (TSI) 147kw MED 9.1
VW Passat (B6-3C) 3.2l FSI 184kw MED 9.1
The increase in Power and Torque is found in the database for our cars
08/02/10
New software update is now done - version 484 is out.
BMW
M3 (E90) - 4.0l V8 (309 kW) Siemens MSS 60
M3 (E92) - 4.0l V8 (309 kW) Siemens MSS 60
M3 (E93) - 4.0l V8 (309 kW) Siemens MSS 60
Read and write over diagnostic port
Checksum by EVC
Wiesmann
MF4 - 4.0l V8 (309 kW) Siemens MSS 60
Read and write over diagnostic port
Checksum by EVC
05/12/10
New contact number for KR while in the USA : +1 702 557 0863
05/08/10
the latest 480 verison is online.
03/25/10
New Install program:
Now we have only one installer program for all our software.
All activations in the system are done in real time.
This way will all software updates be the very latest version.
All new updates will be online in real time at any given time.
You may now also implement your very own advertising banner in the
installer program which will be visible in the running software.
There is no more need for any KEY data for the Hybrid users.
Update Flasher V4.80
New Installation program for all software updates.
Update Online in real time worldwide.
New ECU’s:
BMW
Bosch EDC 17CP02 with Protection Level 3
Misc Models
Read & write now available over the diagnostic port
OptiCan do the checksum & RSA online
BMW
Siemens MSV 80
Misc Models
Read & write now available over the diagnostic port
OptiCan do the checksum & RSA online
Dodge
Bosch EDC 16C31-4.72
Misc Models
Read via File Sharing & write now available over the diagnostic port
OptiCan do the checksum & RSA
Mitsubishi
Bosch EDC 16C31-4.72
Misc Models
Read via File Sharing & write now available over the diagnostic port
OptiCan do the checksum & RSA
Jeep
Bosch EDC 16C31-4.72
Misc Models
Read via File Sharing & write now available over the diagnostic port
OptiCan do the checksum & RSA
VAG
Bosch EDC 17CP14 Special Version
Jetta USA 2.0l TDI CR 103kw
Read & write now available over the diagnostic port
OptiCan do the checksum & RSA online
VAG
Bosch EDC 17U1/U5
Misc Models
Read via File Sharing & write now available over the diagnostic port
OptiCan do the checksum & RSA online
VAG
Bosch EDC 17xx with Protection Level 6
Bosch MED 17xx with Protection Level 6
Misc Models
Read & write now available over the diagnostic port
OptiCan do the checksum & RSA online
Volvo
Bosch EDC 16C34-3.30
Bosch EDC 16C34-5.45
Bosch EDC 16C31-8.1
Misc Models
Read & write now available over the diagnostic port and the ecu connector
OptiCan do the checksum & RSA
Anti Read Protection
We have now deactivated this function, so it is now possible to read
and write files with this protection. This is being done since other
manufacturers already have it in their systems.
We have instead made our own read protection for the files.
Please read more about this in our OBD Wiki
03/18/10
We have found a small error in our latest Newsletter from 4th of March, an error that you as customer
will find good: The Debugger TriCore update will work with the OptiCan One system without any kind
of adapter! Only the Hybrid and the Pocket needs an additional adapter.
Furthermore do we want to point out the fact that the Debugger TriCore license is a onetime
fee, and not a yearly fee.
03/09/10
We at OBD Tuning are proud to announce some exciting changes for us in 2010. Due to our increase in
sales and workload our Management has made the decision to expand our operations beyond
Hamburg, Germany, to better serve our worldwide customer base. Our Management has been looking since
the 4th Quarter of 2009 for a suitable secondary location. The primary Hamburg, Germany, location will still
be the main Headquarters and this secondary location will serve to augment our sales and customer service
capabilities in the future. We will keep you informed of the search and the selection of this secondary
location in the near future. We plan to announce this secondary location by end of the 2nd Quarter of 2010.
03/04/10
We have a new Debugger TriCore update!
The Yearly Debugger update is available for all OptiCan systems, but the ONE/Hybrid/Pocket users
need an additional hardware before the update can be used. The hardware has a cost of Euro 250 plus shipment.
The yearly lisence is Euro 1000 for this TriCore update, and are available for online update.
Debugger Tricore CAN update:
Manufacturer: Miscellaneous
Protected & not Protected TriCore 17xx CAN
Bosch EDC 17xxx
Bosch MED 17xxx
Read & write, checksum is done with OptiCan Online!
Debugger Tricore K-Line udpate:
Manufacturer: Miscellaneous
Protected & not Protected TriCore 17xx K-Line
Bosch EDC 17xxx
Bosch MED 17xxx
Read & write, checksum is done with OptiCan Online!
01/21/10
New Flasher version 479 is available.
Ford:
Kuga 2.4l T, Bosch ME 9.0c
Read and Write diagnostically
Checksum by EVC
BMW:
1er/3er/5er/6er/Xx/plus other with 3.0l i N52 Motor, Siemens MSV 70
Read and Write diagnostically
Checksum is done by OptiCan
Errors with "Time Format":
The system will now accept all time formats; AM/PM or 24h, all time zones.
If there is an error after the update with any time format, let us know.
2010 is here! We hope you all will have good business in this new year, and we hope
you all will follow up on our news this year.
Within short time will we launch something that will make the tuning world easier for everybody.
We would also remind all our US based customers to stay TUNED for our news the next weeks!
12/19/09
Happy Holiday and a Happy New Year!
As we wind down another amazing year we want to thank all of our Clients and Customers
for their business. We look forward to growing and taking the veil of some revolutionary
new products in 2010. We wish all of our Customers and Clients a safe and happy
Holiday Season.
We want all of our Clients especially those in the USA to stay TUNED!
We will be closed from 20.12.2009 until 04.01.2010.
12/16/09
Software version 478 is online!
The following updates are available now:
Programming with Optican over the OBD-2 diagnostic port.
OPEL
• Opel Magneti Marelli (MJD 602)
• Opel Magneti Marelli (MJD 6J0)
• Opel GT Bosch (ME 9.0)
• Opel Insignia Bosch (ME 9.6.1)
BMW
• BMW Siemens MSS 65
• BMW Bosch ME 9.24
Lesen & Schreiben über Diagnose
RSA + Checksumme macht EVC
Read & Write over diagnostic port
RSA & Checksum will be done by EVC
11/20/09
We have a new tool for you today!
OptiCan Dual Pocket
This is our latest development, with the same quality and functions as our earlier
OptiCan One Generation. The tool weight about 60g, and are based on the previous
very well known OptiCan One Generation, and it contains these norms:
K-Line, L-Line, Can 1.2, Can 2.0, Can 3.0, UDS
OptiCan Dual Pocket advantages:
Based on the OptiCan One Generation, with the very best quality in the hardware
like the processor.
Electrical shielding (EMV)
Integrated power control
LED lights: on and activity control
No dongle is needed
The weight is only 60g
Contact us for pricing - or click here to find our offer for December : DECEMBER OFFER
We also have a very nice offer for changing/replace the
Hybrid to the OptiCan Dual Pocket -- CLICK HERE
11/20/09
OptiCan Hybrid Flasher Version 4.77
Opel/Vauxhall
Opel GT 2.0l Turbo (Z20NHH) 188kw Bosch ME 9.0
Opel Antara 3.2l (Z32SE) Bosch ME 9.6.1
Opel Insignia 2.8l (A28NET) 191kw Bosch ME 9.6.1
Read and write over diagnostic port
Checksum from EVC
Opel/Vauxhall
Opel Astra H 1.8l 16V (Z18XER) Siemens Simtec 75.1
Opel Signum 1.8l 16V (Z18XER) Siemens Simtec 75.1
Opel Vectra C 1.8l 16V (Z18XER) Siemens Simtec 75.1
Opel Zafira B 1.8l 16V (Z18XER) Siemens Simtec 75.1
Opel Signum 2.2l 16V (Z22YH) Siemens Simtec 81.1
Opel Vectra C 2.2l 16V (Z22YH) Siemens Simtec 81.1
Opel Zafira A 2.2l 16V (Z22YH) Siemens Simtec 81.1
Opel Zafira B 2.2l 16V (Z22YH) Siemens Simtec 81.1
Write over diagnostic port
Checksum from EVC
11/06/09
It is with great pleasure we can announce these fantastic news for you:
At OBD Tuning can we now exclusively offer Manufacturer Warranty on our
Tuning files – Standard power tuning files and our OptiEco files.
Our hard work with development of high quality flash tool and tuning files,
has given us the unique chance now to offer Manufacturer Warranty with our
tuning files without any catches.
OBD Tuning issues a certification for the Manufacturer Warranty where the tuning
files are bought from us and flashed with our OptiCan tools.
For the time being is the Manufacturer Warranty only available in the German talking
countries, as Germany/Switzerland/Austria, and the Warranty applies
to these car brands:
*Audi • BMW • Citroen • Fiat • Ford • Hyundai • Kia
Mercedes Benz • Opel Peugeot • Renault • Saab
Seat • Skoda • Volvo • Vauxhall • Volkswagen
*Our Manufacturer Warranty conditions are found in our AGB, and by the different Manufacturer AGB’s
Your OBD Tuning Team
09/12/09
OptiCan Hybrid Flasher: version 4.76
* Siemens MSD 80
* Siemens MSD 81
* Norm CAN
Read & Write over diagnostic port
RSA & Checksum are done by OptiCan
BMW
Model x25 /x35
* Bosch EDC16C35 Special
* Norm K-Line/CAN
Read & Write over diagnostic port
RSA & Checksum are done by OptiCan
Ford
All 2.5l T models
* Bosch 9.0c
* Norm K-Line/CAN
Extended Read & Write over diagnostic port
Checksum is done by EVC
Porsche
Cayenne 3.0l TDI CR
* Bosch EDC16CP14
* Norm K-Line/CAN/UDS
Read & Write over diagnostic port
RSA & Checksum in under development, therefore is it not
possible now to write a tuning file.
VAG
all models
* Bosch EDC17x UDS
* Norm UDS
New rescue functions over diagnostic port
OptiCan Bios Information:
New Bios Version for all generations of OptiCan is ready.
Advantages with this new functions are a better communication between the OptiCan
system and the computer. Furthermore will new BIOS versions be available online,
which means no systems needs to be sent to us for this kind of update!!
07/13/09
My phone number is now as before : +47 4567 7693 -- Thanks
07/12/09
My cell phone has been stolen !!
Until further notice am I available on + 47 4023 1772
07/07/09
Complete version of Flasher today is 472
06/12/09
Complete version 470 English
Mini (R55/56/57)
One, Cooper, Cooper S, Clubman
Bosch MED 17.2 Norm CAN
Bosch MEV 17.2 Norm CAN
Read and Write over diagnostic port!
You need internet connection when you work
with this ecu Checksum is done by OptiCan!
VAG:
The checksums for MED17x and EDC17x
is now done Online.
The checksum is now being done easy and
automatical over our server.
You can even do several checksum calculations
at the same time!
The system will send back the corrected file when
it is ready.
Online Communication
SSL certified
The communication with our server is done on
a secure line - with a SSL certificate.
This is being done so you can be sure that all communication will be secured between you
and the server.
NEW OptiCan Software Update function:
Full automatical software update!
The software will check for update by it self. You don''t
need to worrie any more about older or non functional software!
Important information:
In the IMPORTANT INFORMATION link have we
added new important information!
Note: To facilitate operation of the new software update function, computer date must be
formatted to match German version, i.e. Day Month Year with '.' as the divider.
0
5/24/09
Here is the latest tuning file version for the VW Scirocco 2.0 FSI. The Scirocco has got some hardware updates
(exhaust, no cats, airfilter) and a new software beside the obvious drop down and 20 inch rims.
This Scirocco has got our high end power file that boosts this Scirocco to about 300hp. This file
has been tested now several times in different parts of the world, and gives from 295 to 305 hp depending
of area, fuel quality and other minor different settings. The car is owned and modified by one of our dealers
while we have supported the tune file. Check out the pictures below, and see if you don’t agree in the fact
that this car is sexy. It not only looks good, but it pulls fantastic too ;-)
03/20/09
NEW VERSION 467
Cadillac
BLS
Bosch EDC 16C39 Norm K-Line/CAN
Read and Write over diagnostic port
The EVC checksums Works
1.9l 16V TiD 110kw
Cadillac
BLS
GMPT Trionic 8 Norm K-Line
Read and Write over diagnostic port
The EVC checksums Works
2.0l 16V Turbo 129kw
2.0l 16V Turbo 154kw
Cadillac
BLS
Bosch ME 9.6 Norm K-Line/CAN
Read and Write over diagnostic port
The EVC checksums Works
2.8l V6 Turbo 188kw
Opel/Vauxhall
Agila - Astra H - Corsa C - Tigra B
Bosch ME 7.6.1 Norm K-Line
Read and Write over diagnostic port
The EVC checksums Works
1.0l 16V (Z10XEP)
1.4l 16V (Z14XEL)
1.4l 16V (Z14XEP)
Opel/Vauxhall
Agila - Astra H - Corsa C -
Corsa D - Meriva - Tigra B _Zafira B
Bosch ME 7.6.2 Norm CAN
Read and Write over diagnostic port
The EVC checksums Works
1.0l 16V (Z10XEP)
1.2l 16V (Z12XEP)
1.4l 16V (Z14XEL)
1.4l 16V (Z14XEP)
1.6l 16V Turbo (Z16LET)
2.0l 16V Turbo (Z20LEH)
2.0l 16V Turbo (Z20LEL)
2.0l 16V Turbo (Z20LER)
Saab
9-3 - 9-3 SS/SC - 9-5
Bosch EDC 16C39 Norm K-Line/CAN
Read and Write over diagnostic port
The EVC checksums Works
1.9 TiD 88kw
1.9 TiD 110kw
Saab
9-3 - 9-3 SS/SC - 9-5
GMPT Trionic 8 Norm K-Line
Read and Write over diagnostic port
The EVC checksums Works
1.8l Turbo 129kw
2.0l Turbo 129kw
2.0l Turbo 154kw
Saab
9-3 - 9-3 SS/SC - 9-5
Bosch ME 9.6 Norm K-Line/CAN
Read and Write over diagnostic port
The EVC checksums Works
2.8l V6 Turbo 188kw
2.8l V6 XWD Turbo 206kw
Your OBD Tuning Team
02/27/09
Flasher version 465
BMW
All models
Bosch EDC16C31-1MB
Bosch EDC16C35-2MB
Norm advanced with CAN
Read & Write Faster and Safer
RSA + Checksum in OptiCan
BMW
635 (E63) 3.0l d
635 (E64) 3.0l d
X5 (E70) 3.0l d
X6 (E71) 3.0l d
Bosch EDC16C35-2MB CAN
Norm CAN
Read & Write Faster and Safer
RSA + Checksum in OptiCan
Opel/Vauxhall
Vectra C - Signum
GMPT Trionic 8 Norm K-Line/CAN
Read & Write over diagnostic port
The EVC checksums Works!
2.0l 16V Turbo (Z20NET)
Opel/Vauxhall
Vectra C - Signum
Bosch ME 9.6 Norm K-Line/CAN
Advanced
Read & Write over diagnostic port
2.8l (Z28NET)
2.8l (Z28NEH)
2.8l (Z28NEL)
VAG
All models
Bosch MED 9.1 Norm K-Line/CAN
Online File Sharing ready
Refer as: High speed
02/06/09
OptiCan VERSION 463
Ford Focus ST
Bosch ME 9.0 Norm K-Line/CAN
Read & Write extended ranges 2 MB
The EVC checksums Works
2.5l ST 166kw
Opel/Vauxhall
Meriva
Delphi MT35E-2.1 Norm K-Line
Read & Write over diagnostic
1.6l (Z16XEP)
Opel/Vauxhall
Astra H - Vectra C - Signum - Zafira B
Delphi MT35E-2.3 Norm CAN
Write over diagnostic
1.6l (Z16XEP)
1.6l (Z16XE1)
Opel/Vauxhall
Vectra C - Signum
Bosch ME 9.6 Norm K-Line/CAN
Read & Write over diagnostic
2.8l (Z28NET)
2.8l (Z28NEH)
2.8l (Z28NEL)
Opel/Vauxhall
Antara
Bosch ME 9.6.1 Norm K-Line/CAN
Read & Write over diagnostic
3.2l (Z32SE)
VAG
A8 - Q7
Bosch EDC16CP34 Master Norm K-Line/CAN
Bosch EDC16CP34 Slave Norm K-Line/CAN
Read & Write over diagnostic
RSA + Checksum makes OptiCan.
4.2l TDI (DPF) 240kw
VAG
A4 - Q7
Bosch ME 9.1.1 Norm K-Line/CAN
Read & Write over diagnostic
RSA + Checksum makes OptiCan.
2.0l TFSI 147kw
3.6l FSI
4.2l FSI V8 257kw
01/19/09
Flasher version 462
Audi A3
MED 17.5.5 Norm UDS
Read & Write over diagnostically!
RSA + Checksum available online by us!
1.4l TFSI 92kw
Audi A3 - A4 - A5 - TT
MED 17.5 / MED 17.5.0 Norm UDS
Read & Write over diagnostically!
RSA + Checksum available online by us!
1.8l TFSI 88kw
1.8l TFSI 118kw
2.0l TFSI 130kw
2.0l TFSI 132kw
2.0l TFSI 147kw
2.0l TFSI 188kw
2.0l TFSI 195kw
2.0l TFSI 199kw
VW Crafter
EDC 16CP34-4.4 Norm K-Line/CAN
Read & Write over diagnostically!
RSA + Checksum available!
2.5l TDI CR 65kw
2.5l TDI CR 80kw
2.5l TDI CR 100kw
2.5l TDI CR 120kw
Opel/Vauxhall
PSG 16 Norm K-Line
ID information with extended HW + SW Opel
01/19/09
2009 has dawned with many new challenges for the whole world, the economic down turn has affected the majority of business but some parts the tuning industry would appear to be bucking the trend. ChipTunaWarehouse and OptiCan are two cases in example.
From the outset ChipTunaWarehouse aimed to provide a new service to the tuning industry by providing a one-stop shop offering only the best tools to all levels of companies and individuals within the industry. With a very open attitude to helping and information ChipTunaWarehouse has created very strong and loyal relationships with its customers.
ChipTunaWarehouse has for the last 12 months be distributing OptiCan products around the world as an international distributor with no one territory this has been and is very successful, now with the need for clarity and a independent distribution and support in the UK. ChipTunaWarehouse is very proud to be now in addition to being a worldwide distributor to now be also appointed the UK distributor and support for the OptiCan product range.
This is a exciting time for OptiCan with the launch of the new Dual II products with its internal BDM capabilities, it's free debugging capabilities and the ever increasing range of vehicles for 2009 including the very latest EDC17 and MED17 as detailed below.
12/20/08
NEW CHRISTMAS VERSION 461 FOR FLASHER:
Merry Christmas and a happy New Year 2009
Here is our Christmas update
Audi - A4/A5/Q5
EDC 17CP04 Norm UDS
Read and Write over diagnostic port!
RSA + Checksum Ready!
Audi - A4/A5/A6/Q5/Q7
EDC 17CP04 Norm CAN
Read and Write over diagnostic port!
RSA + Checksum Ready!
VW - Phaeton/Touareg
EDC 17CB02 Norm K-Line/CAN
Read and Write over diagnostic port!
RSA + Checksum Ready!
Opel
Astra G/Frontera B/Omega B/Signum/Vectra B/Vectra C/Zafira A
EDC PSG 16 Norm K-Line/CAN
Write over diagnostic port!
Checksum by EVC!
Vauxhall
Astra G/Frontera B/Omega B/Signum/Vectra B/Vectra C/Zafira A
EDC PSG 16 Norm K-Line/CAN
Write over diagnostic port!
Checksum by EVC!
12/15/08
We would like to present our latest product, the OptiCan DUAL II!
After successful testing and to meet the demand from our customers we have equipped the new Dual II with some new features.
(All Dual´s are possible to upgrade to Dual II).
So, what´s new? The hardware has been equipped with an internal BDM interface for the Motorola MPC 5xx family. Thus making it possible to offer the Dual as a Stand-Alone BDM.
The advantage is that for a reasonable price you become a BDM unit in highest quality with the option of updating it online to for example an OptiCan Flasher.
Further more, when you buy the Dual II BDM You also get the Debugger Tool free of charge.
With this, you have a repairing and programming tool of the highest quality available.
For price request, kindly refer to our Online Shop.
The Master/Slave constellation is off course available for this new unit as well.
The following Software Solutions works with the Dual II:
Flasher ● BDM ● Debugger ● ScanCan ● Counter ● TV Free
OBD Tuning Team
12/08/08
HAMBURG 8/12-08
PRESSRELEASE
Dear customers,
We regret to inform you that today we had to dismiss a long-term member of staff. The member of staff is accused of having committed a criminal offence to the disadvantage of our company together with a former customer. For this reason and based on our complaint of the offence, the criminal investigation department searched the premises of the accused individuals in order to seize further evidence. If the suspicion is confirmed, we will also take action against the offenders under civil law and demand compensation of the loss incurred by us. If in the course of the investigation it is found that other individuals have also been involved in criminal offences at the expense of our company, we will not hesitate to effect their criminal conviction and demand payment of amends of our losses using any remedies available.
At this point, we would like to stress that neither our customers nor the quality of our products have been adversely affected. We will therefore continue our business operations without any adverse effect.
We hope we have your understanding for the fact that we will not provide any further information due to criminal investigations being undertaken.
Link to pressrelease in German and English: Click here
Yours sincerely
OBD Tuning TEAM
12/03/08
OptiCan VAG EDC17CP14 Ready to Flash
We now have the Bosch EDC17CP14 VAG
for OptiCan on OBD-2 diagnostic port!
Audi + Seat + Skoda +VW
VAG EDC 17CP14
1.9l TDI 77kw
1.9l TDI 105kw
2.0l TDI CR 100kw
2.0l TDI CR 103kw
2.0l TDI CR 105kw
2.0l TDI CR 120kw
2.0l TDI CR 125kw
Reading & Writing over diagnostic port!
RSA + checksum calculation!
This will be released Friday 5/12-08
11/11/08
New software version 457 for OptiCan Flasher
Audi + Seat + Skoda + VW
ECU Bosch MED 17.1 , ECU Bosch MED 17.5 / 17.5.0 , ECU Bosch MED 17.5.1 , ECU Bosch MED 17.5.20
Various models
read and write over OBD-2
Checksum + RSA available online by us!
11/07/08
Finally, We now have the Bosch MED17 VAG
for OptiCan on OBD-2 diagnostic interface!
These ecu's are ready:
Audi + Seat + Skoda + VW
VAG MED 17.1
2.0l TFSI 147kw/USA
2.0l TFSI 155kw
VAG MED 17.5
1.8l TFSI 88kw
1.8l TFSI 118kw
2.0l TFSI 130kw
2.0l TFSI 132kw
2.0l TFSI 147kw
2.0l TFSI 188kw
2.0l TFSI 195kw
2.0l TFSI 199kw
VAG MED 17.5.1
1.4l TSI 103kw
1.4l TSI 118kw
VAG MED 17.5.20
1.4l TSI 92kw
Reading & Writing over diagnostic port!
RSA + checksum calculation!
This version will be released monday
Shortly will VAG EDC17 also follow!
10/02/08
New version 4.54
BMW 1er E87 2.0ld 100KW BOSCH EDC 17C06!
BMW 3er E90 2.0ld 100KW BOSCH EDC 17C06!
Reading (not protectet) & Writing over diagnostic port.
RSA + checksum calculation
09/30/08
NEW version 449
MED 17.5.5 for Audi/VW/SEAT/Skoda - various models
read and write over OBD-2
09/26/08
On Tuesday 30. September 2008, will OptiCan launch BOSCH MED17 for:
VAG
Reading & Writing over diagnostic port, RSA + checksum calculation integrated.
EDC17 to come directly after.
PS: Software update on all types OptiCan will be available within the YEARLY update fee! No Bios update necessary!
We will start ordering and updates on Tuesday 30. Of September 2008.
09/25/08
New version 448 with:
Opel / Vauxhall / Holden:
ECU Delphi HSFI - C
ECU Delphi HSFI - 2.1
ECU Delphi HSFI - 2.5
ECU GMPT E15
ECU Bosch ME 3.1.1
ECU Bosch EDC 16C39
ECU Siemens Simtec 70
Various models - read and write over OBD-2
09/18/08
Dear OptiCan user – Dear new customer
We are today changing the price policy for the OptiCan system.
We offer now the Flasher system complete for an yearly update fee. This yearly update
fee is for ALL PKW’s in our system. The yearly update will include ALL ecu updates we have,
included the different edc16/17 modules we have in the system – and newer coming.
The price will be EUR 1000, Netto for 1 year.
The License update will be for one year at the time, for example 09/18/2008 > 09/18/2009
The License will be valid for ALL PKW updates within the year of license.
When ordering, we need the serial number of the hardware, and dongle number (key file number).
Contact us for order, payment and update -- email: info@optican.net
09/17/08
We have now launched our new forum for OptiCan - you can register here:
http://www.obd-tuning-forum.com/
You are welcome to register and participate with questions and comments. We will try to give
some level of support on this forum. Most important will the information we give for our
updates there though :-)
09/15/08
New in version 446
BMW
Bosch EDC 17CP02
read and write over OBD-2
RSA + Checksum
Citroen/Peugeot
Bosch MED 17.4 Extern memory
Bosch MED 17.4 Intern memory
read and write over OBD-2
RSA + Checksum
AND
Some other RSA + Checksum codes
09/12/08
Update from OptiCan for Monday 15. September 2008
We will launch BOSCH EDC17 & MED17 for:
BMW EDC17, Citroen MED17 and Peugeot MED17
Reading & Writing over diagnostic port, RSA + checksum calculation integrated.
In short time will also VAG MED17 & EDC17 follow!
PS: Software update on all types OptiCan will be available against an update fee. No Bios update necessary!
We will start ordering and updates on Monday.
08/04/08
New Flasher version 443 is out. Some new SIM4 ecu's for MB is ready.
07/17/08
New Flasher version 442, with new MB codes.
07/16/08
It is with great pleasure we greet our new dealer in Athens.
MAIKON HorsePower, Mr. Kyriakos Marmaras will serve Athens with the Optican Flasher and Files.
Welcome Mr Kyriakos !!!
07/15/08
New software versions of Flasher, BDM and Debugger today!
Check download page.
06/18/08
New version 439 for Flasher - Dual and Hybrid is out.
06/12/08
New Flasher software for both Hybrid and Dual - Version 438
Complete version 438
MED 9 ECU's stand alone Audi/Seat/Skoda/VW:
OptiCan do now calculate the checksum. We have added this
because some remapping software are calculating the checksum wrong.
MED 9 ECU's Master / Slave Audi
OptiCan do now calculate the checksum. We have added this
because some remapping software are calculating the checksum wrong.
In addition:
We have also added a rescue operation for the master and slave
if the ECU is programmed with a defective code!
Therefore can the ECU easily be set back to original!
Chrysler
EDC16CP31-x
Vehicles with problematic CAN is now not a problem with OptiCan. There is now
no problems with this ecu type when flashing over diagnostic.
Mercedes
Detects automatically the correct ECU types when writing on the ecu.
Therefore is it not possible to accidental delete the ecu.
The following ECU's Implemented with auto function:
EDC16C2-3
EDC16C2-4
EDC16C2-7
EDC16C31
Mercedes
EDC16CP31-x
Vehicles with problematic CAN is now not a problem with OptiCan. There is now
no problems with this ecu type when flashing over diagnostic.
ALSO NEW FOR HYBRID:
KEY Data Automatically in the Hybrid system:
From now is it possible to download the files for key dongle, all automated!
The files can also manually be downloaded from the administration menu.
05/27/08
New versions of:
OptiCan Flasher Dual & Hybrid - v436
05/07/08
New versions of:
OptiCan Counter - v808
OptiCan Dual debugger - v311
OptiCan Flasher Dual - v435
OptiCan TV Free Dual - 204
05/01/08
New version 434 of Flasher for Dual & Hybrid is out. Some minor changes has been
done in the software communication. Speed has been upgraded on several areas.
04/23/08
New version 433 - Updated Opel norm
04/16/08
Version 427
Mercruiser QSD 4 Zyl. 2.0l Bosch EDC 16C39-5.1
Read: No / Write: Yes
Mercruiser QSD 4 Zyl. 2.8l Bosch EDC 16C39-5.1
Read: No / Write: Yes
Mercruiser QSD 6 Zyl. 4.2l Bosch EDC 16C39-5.1
Read: No / Write: Yes
Opel Vivaro 2.0l CDTI Bosch EDC 16CP33
Read: Yes / Write: Yes
Opel Vivaro 2.5l CDTI Bosch EDC 16CP33
Read: Yes / Write: Yes
Renault Laguna II 2.0l DCI 16V EU4 Bosch EDC 16CP33
Read: Yes / Write: Yes
Renault Megane II 2.0l DCI 16V EU4 Bosch EDC 16CP33
Read: Yes / Write: Yes
Renault Trafic 2.0l DCI Bosch EDC 16CP33
Read: Yes / Write: Yes
Renault Trafic 2.5l DCI Bosch EDC 16CP33
Read: Yes / Write: Yes
Vauxhall Vivaro 2.0l CDTI Bosch EDC 16CP33
Read: Yes / Write: Yes
Vauxhall Vivaro 2.5l CDTI Bosch EDC 16CP33
Read: Yes / Write: Yes
Volvo S80 III D5 2.4l D Bosch EDC 16C31-7.5
Read: Yes / Write: Yes
Volvo V70 III D5 2.4l D Bosch EDC 16C31-7.5
Read: Yes / Write: Yes 04/02/08
We have now launched a new driver for our systems. This means that you would need to
download new versions of all the software you are using. Please uninstall the software that
is already installed on your computer. Intstall then the new software, and then connect
your hardware so the drivers is being installed correct
03/14/08
New Flasher version for the Hybrid & Dual is now out: Flasher v424.
Some few changes for some Opel ecu's,
AND new is FORD FOCUS ST 2.5T with ME9 ecu
03/06/08
We are happy to announce that we have updated the Flasher software for Dual and Hybrid with some Porsche ecu’s
New Flasher version is 423:
Porsche 911 3.6l BITURBO Bosch ME7.8
Porsche 911 3.6l BITURBOGT2 Bosch ME7.8
Porsche 911 3.6l CARRERA Bosch ME7.8
Porsche 911 3.6l CARRERA4S Bosch ME7.8
Porsche 911 3.6l GT3 Bosch ME7.8
Porsche 911 3.8l CARRERA Bosch ME7.8
Porsche 911 New 3.6l CARRERA Bosch ME7.8
Porsche 911 New 3.6l GT3 Bosch ME7.8
Porsche 911 New 3.8l CARRERA Bosch ME7.8
Porsche Boxter New 2.7l Bosch ME7.8
Porsche Boxter New 3.2l Bosch ME7.8
Porsche Boxter New 3.4l Bosch ME7.8
Porsche Boxter S 3.2l Bosch ME7.8
Porsche Cayman 3.4l Bosch ME7.8
Volvo alle 2,4l Diesel Bosch for Flasher on the ecu connector
BMW Siemens ECU is improved
BMW Bosch EDC16 ECU is improved
02/20/08
New software versions are out today:
OptiCan Dual Flasher version 422
OptiCan Hybrid Flasher version 422
ScanCan Hybrid version 118
02/08/08
ScanCan General OBD-II Tester
!!! The General Diagnostic System!!!
We are happy to present our latest addition.
The following vehicle models are supported:
|
Alfa Romeo |
AMG |
Audi |
Bentley |
BMW |
Chevrolet |
|
Chrysler |
Citroen |
Ferrari |
Fiat |
Ford |
GM |
|
Honda |
Hyundai |
Jeep |
Kia |
Lancia |
Land Rover |
|
Maybach |
Mazda |
Mc Laren |
MCC |
Mercedes |
MG |
|
Mini |
Mitsubishi |
Nissan |
Opel |
Peugeot |
Porsche |
|
Renault |
Rover |
Saab |
Seat |
Skoda |
Suzuki |
|
Toyota |
Vauxhall |
Volvo |
Volkswagen |
|
|
|
Excellent characteristics of the General ScanCan:
Automatic protocol recognition.
Automatic analysis of diagnostic trouble codes and fault recognition.
Requesting DTC and erasing (all in one go).
Analysing the readings of up to 4 different
systems is possible at the same time.
Recording and interpretation of readings.
Easiest to use.
Can be applied to a raft of different car manufacturers.
Can be used in vehicles as of YOC 2001 or about.
Works on any commercially available PC or laptop.
Network administration is possible (for data protection) and vital for large companies.
Analysis of readings allows
user-defined archiving and storing!
Small-sized and handy! |
|
|
|
Knowledge base and capabilities of the General ScanCan:
Request current powertrain diagnostic data.
Request freeze frame data.
Request emission-related diagnostic trouble codes.
Clear/reset emission-related diagnostic information.
Request oxygen sensor monitoring test results.
Request on-board monitoring test results for specific monitored systems.
Request emission-related diagnostic trouble codes detected during current or last completed driving cycle.
Request control of on-board system, test or component.
Request vehicle information.
Allows storing of DTC protocols
and a good deal more!!! |
01/16/08
New in Flasher version 420 for both Dual and Hybrid Flasher:
Mercedes GL 420 CDI - Bosch EDC 16CP36-4.x
Mercedes ML 420 CDI (W164) - Bosch EDC 16CP36-4.x
Mercedes S 420 CDI (W221) - Bosch EDC 16CP36-4.x
01/14/08
New BDM update is out, version 118 with Delphi ISUZU Truck
read and write.
New ScanCan Dual software is also out, version 114 with some new features.
12/13/07
New software for Hybrid Flasher and Hybrid ScanCan is now available - see download page.
12/10/07
BREAKING NEWS:
OptiCan HYBRID Flasher is our newest flash tool. This is the best priced flash tool on the market.
There have been requests for a low cost version of our OptiCan Flash tools, so we have therefore developed a high quality, small size flash tool that don’t take any space in any tool box.
The size of the OptiCan HYBRID Flasher fits like a glow in your hand – see picture.
All functions in OptiCan HYBRID is available with a pc or laptop.
Do not mistake our new OptiCan HYBRID for a “cheap no good tool” – The OptiCan HYBRID has the highest possible quality on all parts - all build in a small handy format.
Of course does OptiCan HYBRID come as Master and Slave versions, as well as a new credit version. The new system is also compatible with the larger OptiCan systems (One & Dual).
There is now possible to have all OptiCan system either as a complete updated system with support functions (cost update) or just buy for the update you need, and as a “pay as you go” system with credits. The credit system is updated online as you need the flashes.
Get new business with OptiCan HYBRID Flasher through new options for your self and your customers. CLICK ON PICTURE TO ENLARGE
11/17/07-11/18/07
Stinger OBD tuning presented the Optican tools and methods used to reflash ECU to the general public at the exibition in Nicosia.
 
11/21/07
New BDM version 116 is available. Now is there also a new BDM user guide to be found here
11/01/07
ScanCan Hybrid hardware has these communication norms inside:
K-Line / L-Line / CAN 1.2 / CAN 2.0
With this inexpensive tool can you with ScanCan VAG software make all the needed diagnostic functions,
like for example read and clear error codes for all VAG cars.
If you need to see “live”, make contact with your closest main distributor, and you will get a live show of the functions.
The Hybrid tool has the highest possible quality in the processors, and is not to be compared to cheaper diagnostic VAG tools.
ScanCan Hybrid also read and clear the codes in the latest VAG cars, like A5 and S5.
Introduction price for ScanCan Hybrid for VAG is: € 399,- net
10/17/07
New BDM version 111 is ready:
Scania HPI Trucks ECU Motorola S6 read and Write
Lamborghini Gallardo 5.0l V10 ECU Campi 01S
Lamborghini Gallardo Spyder 5.0l V10 ECU Campi 01S
Lamborghini Gallardo Superleggera 5.0l V10 ECU Campi 01S
Lamborghini Murcielago LP640 6.5l V12 ECU Campi 01S
Lamborghini Murcielago LP640 Roadster 6.5l V12 ECU Campi 01S
read and Write
Lotus Elise 1.8l ECU Campi 01S
read and Write
10/11/07
New Flasher update - v416
Scania new Version from the Bosch MS 6.2 over EOBD read and write
Automatic suggestion for name the assignment (Customer desire) when storing
Interactive assistance function for the most important ECU, this function runs also off-line.
10/05/07
BDM update V1.09
New security function for Trionik 5 buildt in
Flasher update to v414
Audi S6 & RS4 new Version over EOBD read and write
VW Touareg 5.0l TDI, EDC16U31-3.2 Master, EDC16U31-3.2 Slave, over EOBD read and write
09/27/07
THE DAY HAS AT LAST COME -- Here is our new software for OptiCan: 
!!! The newest VAG Diagnostic System !!!
We are very proud to announce our new software tool!
These car brands are implemented:
Audi / Seat / Skoda / Volkswagen
These protocols are build in:
KWP 1281 / KWP 2000 / CAN / UDS
Also the latest protocols are implemented:
for example is Audi A5 3.0l TDI with the latest protocol implemented!
This is the Outstanding characteristics of ScanCan:
Automatically recognition of protocols
Complete system scan, recognition of all blocked modules
Administration of your own tester information - (e.g. operating number, Importer number, tester number)
Automatically error analysis and recognition
Easy use - Works on any PC or laptop
Network administration is possible (data security), important for large enterprises.
Error memory analysis with option for saving the result!
INFO about ScanCan:
Read and clear of error memory in all modules (all at once)
Read and clear memory in all modules - individual modules
Measured value collection and evaluation
Measured value of block adjustment
Adjustment of various modules
ID information evaluation with parts information
Saves the error codes.
Reprogramming of different modules
Coding of various modules ------ and much more!!!
You have complete access to your data for analyzes since the software runs on a normal computer.
At any time you can check the complete software functions by downloading the latest software version from our web site.
The ScanCan software can be used with our OptiCan flasher system:
OptiCan 1 + OptiCan dual firmware V02.21-01.05
PICTURES:
   
More pictures here
Video 1 here
Video 2 here
ENJOY!!
09/24/07
A small update from OptiCan for our Debugger - v306 system:
Citroen ECU Bosch ME 7.4.5 with ST10F27x Processor
Peugeot ECU Bosch ME 7.4.5 with ST10F27x Processor
Renault ECU Bosch ME 7.4.5 with ST10F27x Processor
MCC Smart 1.l Turbo ECU Bosch ME 7.7.0 with ST10F27x Processor
Truck ECU Phoenix CNTRL L6
Citroen ECU Bosch ME 7.4.5 with ST10F27x Processor
Peugeot ECU Bosch ME 7.4.5 with ST10F27x Processor
Renault ECU Bosch ME 7.4.5 with ST10F27x Processor
MCC Smart 1.l Turbo ECU Bosch ME 7.7.0 with ST10F27x Processor
Truck ECU Phoenix CNTRL L6
09/11/07
This year SEMA show is coming up soon. We will as normal be there! If you are interested in a meeting or a demo should you email us as soon as possible to set up a time for this during the week of SEMA show – 29th of October until Friday 2nd of November. Please use info@optican.net
08/22/07
Since correct voltage is so important when we flash cars, have we tried to find the best alternative for a power supply for our OptiCan users. We have earlier found Bremen HS1000, which is an expensive power charger. All data about this is available on our download site.
Since this charger is so expensive, have we searched for another cheaper supply. I have now the pleasure of announcing that we have found another supply also.
We can now offer PSP1000 from MeanWell. This power supply has more or less the same specs as Bremen. The price for PSP1000 is significant lower than the one from Bremen. We have special deal and price for this power supply. Please go to the download page to see the spec on MeanWell PSP1000
Contact for price info@optican.net
08/16/07
New OptiCan Flasher version 413
VAG Siemens/VDO Simos PPD 1.1 -1.5 over EOBD read and write
VAG Siemens/VDO Simos PPD 1.1 -1.5 RSA + Cheksumme
New VW Sharran EDC 16U31-3.1 over EOBD read and write
New VW Sharran EDC 16U31-3.1 RSA + Cheksumme
New BMW 325/335d (E91) EDC 16C35_2MB over EOBD read and write
New BMW 325/335d (E91) EDC 16C35_2MB RSA + Cheksumme
New BMW 525/535d (E61) EDC 16C35_2MB over EOBD read and write
New BMW 525/535d (E61) EDC 16C35_2MB RSA + Cheksumme
08/10/07
New BDM software - version 108 with trucks and new pictures.
07/25/07
New great update from OptiCan!
New Flasher software v 412 is launched today, where we now have ready Trucks:
DAF Truck
Fendt Truck
Iveco Truck
MAN Truck
New Holland Truck
Nissan Truck
Renault Truck
Scania Truck
In total do we have about 110 new truck engines/ecu's inside today.
We will also come with a new update for BDM with trucks inside!
07/20/07
OptiCan comes with two updates today:
BDM version 1.06
New Mercedes W221 S600 ECU ME 2.7.2 New BMW ECU MSS 65
DEBUGGER version 3.04
New Ford ECU SIM 210 New Caterfild ECU SIM 210 New Mercedes W221 S600 ECU ME 2.7.2
07/13/07
We have released a new version for Flasher -v411. We have made some changes for the ME9.1, where the read time now is down at about 20 minutes. We have also changed a minor bug for the VAG edc15p ecu's.
07/09/07
It is with great pleasure we greet our new dealer in Cyprus welcome. Christos Aristidou & Lambros Papasavvas at Stinger Obd Tuning will serve Cyprus and Greece with our OptiCan system and files. We believe the Cyprus’ car owners will enjoy the service by Christos. Christos & Lambros is to be found at multipower@cytanet.com.cy or +357-99-662602 and +357-99-677601
Welcome Christos & Lambros!
07/05/07
It is with great pleasure we welcome a new dealer for OptiCan in Norway. Kimmit Sport Racing is located in Førde, west in Norway. They will cover large areas from Bergen to Møre & Romsdal with their mobile tuner car. Kimmit has been in the tuning business a while now, representing a big tuner in Norway, using CMD flash tools. They have now found out that it was time to move on to a system where they can feel secure and safe -and the choice was our OptiCan Flasher system combined with our tuning files. Kimmit has a good reputation in Norway, and they know that with our system they will not only keep that reputation, but also increase business.
Kimmit Sport Racing is available on email : salg@ksr.as or phone: +47 4680 7171, and their web site is: www.ksr.as
We welcome  to the OptiCan family!
06/28/07
We want to congratulate our main distributor in UK with their new workshop. ChippedUK has managed to set up a clean and large workshop where we believe the customer will enjoy the time while they get their car tuned up. Here are some pictures of the new workshop:
  
  
06/18/07
New OptiCan Flasher version 410 :
Following BMW Bosch EDC 16
16C_1MB
16C_1MB_2 New Version
16C35_2MB
over EOBD read and write
06/12/07
New Flasher update: v 409 - We have now implemented the checksums in the OptiCan for BMW EDC16C_1MB & EDC16C35_2MB
06/07/07
BREAKING UPDATE NEWS FROM OPTICAN:
New version of our OptiCan Flasher software is now available: V408
EDC16+ for BMW. Complete read and write for 1MB & 2MB files. It will apply an update fee for this update. Please contact us for information: info@optican.net
The following EDC 16C_1MB & EDC 16C35_2MB
over EOBD read and write
BMW 118 (E87) 2.0l d Bosch EDC 16C35_2MB
BMW 120 (E87) 2.0l d Bosch EDC 16C35_2MB
BMW 318 (E46) 2.0l d Bosch EDC 16C_1MB
BMW 318 (E46) 2.0l d Bosch EDC 16C35_2MB
BMW 318 (E90) 2.0l d Bosch EDC 16C_1MB
BMW 318 (E90) 2.0l d Bosch EDC 16C35_2MB
BMW 318 (E91) 2.0l d Bosch EDC 16C_1MB
BMW 318 (E91) 2.0l d Bosch EDC 16C35_2MB
BMW 320 (E46) 2.0l d Bosch EDC 16C_1MB
BMW 320 (E46) 2.0l d Bosch EDC 16C35_2MB
BMW 320 (E90) 2.0l d Bosch EDC 16C_1MB
BMW 320 (E90) 2.0l d Bosch EDC 16C35_2MB
BMW 320 (E91) 2.0l d Bosch EDC 16C_1MB
BMW 320 (E91) 2.0l d Bosch EDC 16C35_2MB
BMW 330 (E46) 3.0l d Bosch EDC 16C_1MB
BMW 330 (E46) 3.0l d Bosch EDC 16C35_2MB
BMW 330 (E90) 3.0l d Bosch EDC 16C_1MB
BMW 330 (E90) 3.0l d Bosch EDC 16C35_2MB
BMW 330 (E91) 3.0l d Bosch EDC 16C_1MB
BMW 330 (E91) 3.0l d Bosch EDC 16C35_2MB
BMW 525 (E60) 3.0l d Bosch EDC 16C_1MB
BMW 525 (E60) 3.0l d Bosch EDC 16C35_2MB
BMW 525 (E61) 3.0l d Bosch EDC 16C_1MB
BMW 525 (E61) 3.0l d Bosch EDC 16C35_2MB
BMW 530 (E60) 3.0l d Bosch EDC 16C_1MB
BMW 530 (E60) 3.0l d Bosch EDC 16C35_2MB
BMW 530 (E61) 3.0l d Bosch EDC 16C_1MB
BMW 530 (E61) 3.0l d Bosch EDC 16C35_2MB
BMW 730 (E65) 3.0l d Bosch EDC 16C_1MB
BMW 730 (E65) 3.0l d Bosch EDC 16C35_2MB
BMW X3 (E83) 2.0l d Bosch EDC 16C_1MB
BMW X3 (E83) 2.0l d Bosch EDC 16C35_2MB
BMW X3 (E83) 3.0l d Bosch EDC 16C_1MB
BMW X3 (E83) 3.0l d Bosch EDC 16C35_2MB
BMW X5 (E53) 3.0l d Bosch EDC 16C_1MB
BMW X5 (E53) 3.0l d Bosch EDC 16C35_2MB
BMW X5 (E53) 3.0l d Bosch EDC 16C_1MB
BMW X5 (E53) 3.0l d Bosch EDC 16C35_2MB
Additionally is the Opel VXR 2.0T and all Vauxhalls been added to the flasher system in the new version 408.
06/01/07
New OptiCan Flasher update - v407:
VAG has now got an error code eraser after writing a file to the ecu.
ONLY for cars where the communication goes over the K-Line !
The following EDG 15C5.1 over EOBD
read and write
MCC Smart 0.8l CDI Bosch EDG 15C5.1
The following EDC 16C39 over EOBD
read and write
Alfa 147 1.9l JTDM 16V Bosch EDC 16C39 Alfa 147 1.9l JTDM 8V Bosch EDC 16C39 Alfa 159 1.9l JTDM 16V Bosch EDC 16C39 Alfa 159 1.9l JTDM 8V Bosch EDC 16C39 Alfa 159 Sportwagon 1.9l JTDM 16V Bosch EDC 16C39 Alfa 159 Sportwagon 1.9l JTDM 8V Bosch EDC 16C39 Alfa GT 1.9l JTDM 16V Bosch EDC 16C39 Fiat Bravo 1.9l JTD Multijet 16V Bosch EDC 16C39 Fiat Bravo 1.9l JTD Multijet 8V Bosch EDC 16C39 Fiat Croma 1.9l JTD Multijet 16V Bosch EDC 16C39 Fiat Croma 1.9l JTD Multijet 8V Bosch EDC 16C39 Fiat Doblo 1.9l JTD Multijet 8V Bosch EDC 16C39 Fiat Doblo 1.9l JTD Multijet 8V (DPF) Bosch EDC 16C39 Fiat Doblo Cargo 1.9l JTD Multijet 8V Bosch EDC 16C39 Fiat Ducato 2.2l JTD Multijet 16V Bosch EDC 16C39 Fiat Ducato 2.3l JTD Multijet 16V Bosch EDC 16C39 Fiat Ducato 3.0l JTD Multijet 16V Bosch EDC 16C39 Fiat Grande Punto 1.9l JTD Multijet 8V Bosch EDC 16C39 Fiat Idea 1.9l JTD Multijet 8V Bosch EDC 16C39 Fiat Multipla 1.9l JTD Multijet 8V (DPF) Bosch EDC 16C39 Fiat Scudo 1.6l JTD Multijet 16V Bosch EDC 16C39 Fiat Scudo 2.0l JTD Multijet 16V Bosch EDC 16C39 Fiat Scudo 2.0l JTD Multijet 16V Bosch EDC 16C39 Fiat Sedici 1.9l JTD Multijet 8V Bosch EDC 16C39 Fiat Stilo Multi Wagon 1.9l JTD Multijet 16V Bosch EDC 16C39 Fiat Stilo Multi Wagon 1.9l JTD Multijet 8V Bosch EDC 16C39 Fiat Ulysse 2.0l JTD Multijet 16V (DPF) Bosch EDC 16C39 Lancia Musa 1.9l JTD Multijet 8V Bosch EDC 16C39 Lancia Phedra 2.0l JTD Multijet 16V Bosch EDC 16C39
05/16/07
Also an update of our Console and TV Free today – Version 105 for Console and version 201 for TV Free
05/16/07
New breaking BDM update from OptiCan – Version 105:
New CPU Types:
Motorola MC 68332
Motorola MC YQQCU
New ECU:
Saab 900 2.0 16v Trionic T5 engine type B204L 185hp/263nm
Saab 9000 2.3 16v Trionic T5 engine type B234i 150hp/210nm 94-98
Saab 9000 2.3 16v Trionic T5 engine type B234E 175hp/253nm
Saab 9000 2.3 16v Trionic T5 engine type B234L 200hp/330nm
Saab 9000 2.3 16v Trionic T5 engine type B234R 225hp/350nm
Saab 9 3 2.0 16v Trionic T5 engine type B204L 185hp/263nm 98-99
Saab 9 3 2.0 16v Trionic T5 engine type B204R 200hp 98-99
Saab 9 3 2.0 16v Trionic T5 engine type B204E 154hp/219nm 99-00
Saab 9 3 2.0 16v Trionic T7 engine type B205E 150hp/240nm 01-
Saab 9 3 2.0 16v Trionic T7 engine type B205L 185hp/263nm 00-
Saab 9 3 2.0 16v Trionic T7 engine type B205R 205hp/280nm 00-
Saab 9 3 2.3 16v Trionic T7 engine type B235R 230hp/350nm
Saab 9 5 2.0 16v Trionic T7 engine type B205E 150hp/240nm 98-
Saab 9 5 2.3 16v Trionic T7 engine type B235L 185hp/280nm
Saab 9 5 2.3 16v Trionic T7 engine type B235L 220hp/310nm 04-
Saab 9 5 2.3 16v Trionic T7 engine type B235R 250hp/350nm 02-
Saab 9 5 2.3 16v Trionic T7 engine type B235R 230hp/350nm
Saab 9 5 3.0 24v V6 Trionic T7 engine type B308 200hp/310nm
05/10/07
It is a joy for us to welcome our new dealer in Dubai, UAE. Formula Performance has several years of experience with tuning of Asian cars. With our OptiCan will Formula Performance be able to tune up European cars also. They have dynos, so they will also be able to special design files for cars with special hardware settings.
05/08/07
New OptiCan Counter v 805
Safety check of known binary file.
Now the current selected file is being stored, so it can be changed again and again without new read. Security increased by control of sufficient memory in ECU.
05/07/07
The Console has new build in function; The Console v104 will be closed when choosing any of the OptiCan software. When done with the software, will the Console restart. Important to make a complete update of all the software you are using.
04/24/07
OptiCan and AmD Technik announce strategic alliance.
As from today, AmD and OptiCan has made an strategic alliance, where AmD will be marketing OptiCan world wide for their dealers. AmD will be using our database with their own tuning files, so the AmD dealers World Wide will be able to access new tuning software from AmD for all types of cars 24/7 year round.
AmD is a well known UK based company established in 1987. In February 2007 was AmD taken over by two other companies – Big Boys Toys and Mega4. BBT and Mega4 have been Revo dealers for a long time. Owner of BBT, Shaun Hollamby has a huge experience in the racing world, while Simon Howarth, owner of Mega4, has been sales manager at Revo UK for several years. Together has Shaun and Simon a
great background for marketing AmD and OptiCan.
AmD will offer OptiCan Flasher and AmD software to dealers’ world wide under the branded name “AmD OptiCan”.
We are very confident that this alliance will bring very high professionalism and very good tuning products to the market place world wide.
We whish AmD welcome!
04/24/07
BDM update – version 104
Now available: New adapters and bdm framework!
New ECU:
Fiat Grande Punto 1.9 Multijet 88/96kw Bosch EDC 16+ MPC562
Mercedes W204 C-Klasse 200 CDI Delphi HW 50.05 CRD.11 MPC563
Mercedes W204 C-Klasse 220 CDI Delphi HW 50.05 CRD.11 MPC563
Mercedes W211 E-Klasse 200 CDI Delphi HW 50.05 CRD.11 MPC563
04/20/07
OptiCan Flasher has a new important and first time update - version 406 - with these MED9.1 Master/Slave combinations:
MED 9.1 Master/Slave over EOBD read and write:
Audi S6 5.2l V10 FSI Bosch MED 9.1 Master
Audi S6 5.2l V10 FSI Bosch MED 9.1 Slave
Audi S8 5.2l V10 FSI Bosch MED 9.1 Master
Audi S8 5.2l V10 FSI Bosch MED 9.1 Slave
Audi RS4 4.2l V8 Bosch MED 9.1 Master
Audi RS4 4.2l V8 Bosch MED 9.1 Slave
Audi S4 4.2l V8 Bosch MED 9.1 Master
Audi S4 4.2l V8 Bosch MED 9.1 Slave
Audi S5 4.2l V8 Bosch MED 9.1 Master
Audi S5 4.2l V8 Bosch MED 9.1 Slave
Audi R8 4.2l V8 Bosch MED 9.1 Master
Audi R8 4.2l V8 Bosch MED 9.1 Slave
Additionally will more cars with this ecu combination be added after testing.
04/10/07
New BDM update v. 1.03
New functions have been implemented. New processor is now ready, the MPC555, which will cover a broad range of ecu types, included the BMW Siemens MSV70.
Further more is there now build in an automatically power control for read and write. Complete ID is also build in. The new version also make sure that the file is saved 100% correct, and there also has been a reduction in write time with about 90% !
Here is a list over the cars/ecu's the BDM works with - NOT COMPLETE LIST - the list will be filled out as we go:
http://www.optican.net/downloads/BDMcarlist.htm
03/29/07
New update for Debugger - version 302
New is Volvo S40/V40 2.0l Turbo ECU Siemens S108
03/23/07
New Counter update: Version 804 is released.
Audi/VAG Group TDI Bosch EDC 16U1 old and EDC 16CP read and write over OBD-2
03/21/07
New Flasher update - new version is 4.05 - Just a bug fix in the earlier software for 1mb file of edc16
03/15/07
We have the latest few months seen that there is big problems for a lot of dealers to maintain correct Voltage
on the cars they are to flash. In order to be sure that the Voltage is correct at any given time, have we searched
the market for the best Power Supply available. We have found that our supplier of power chargers through
several years – Elektron-Bremen – has launched a new Power Supply that is simply fantastic.
Elektron-Bremen has launched their new HS-1000 which is a intelligent power supply approved by all car manufacturers
and that works in the whole world, from 110-260 systems.
We recommend our OptiCan users to get this power supply as soon as possible. The HS-1000 can be ordered directly
from the factory at a cost of about Euro 1000 ex. Vat and shipment when we approve the order as a dealer of us
check this PDF file for complete information : http://www.optican.net/downloads/Elektron-Bremen%20HS-1000.pdf
03/12/07
New Counter version 802
Now with Audi/VAG Group TDI Bosch EDC 16U1
read and write over OBD-2
03/09/07
A new day - a new update from OptiCan..... New TV Free software version 200 is released.
New design and Windows Vista ready, and integrated with Console
03/08/07
New OptiCan Console software - version 103
Buttons added for Counter and BDM-JTAG
03/07/07
We are proud to announce our newest software:
OptiCan BDM-JTAG Tool
The OptiCan BDM-JTAG tool is ready to download.
With this tool you will be able to read and write over the BDM Port in the ecu. There may be used both solder directly or BDM adapter
pins directly. We will rapidly update the software with new software.
03/04/07
We have got some few comments on our web site and the size it is made in. We need to point out that our web site is best viewed in 1024*800 or higher.
If you use a lower screen resolution you will loose the options on our download page. Be also aware that we have a scroll bar inside the Download and News page.
03/02/07
404 version for Flasher is out:
New Diagnostic Funktion
Audi/VAG Group 2.5l TDI (163HP)
Bosch EDC15VM-1M
read and write over OBD-2
02/23/07
Yet a new software update - OptiCan flasher version 403
New Diagnostic Function:
Audi/VAG Group 2.5l TDI
Bosch EDC15VM-1M
read and write over OBD-2
Audi/VAG Group 1.2l + 1.4l TDI
Bosch EDC15P & P+
read and write over OBD-2
02/19/07
New fantastic news from optiCan
We are proud to announce the new software OptiCan Counter
With the OptiCan Counter you can now change the „flash Counter“ in the edc16 ecu’s !!
No other flash tool is presently able to offer this function.
Consequently, OptiCan is the only tool in the world that can presently provide this option. As required, the check sum will be set to the original value when original flashing of the ECU is performed.
In addition, the software will run on any commercially available PC or laptop to enable you to directly access your own data.
Information on the flash counter:
With every ECU, especially those ECUs of the Audi/VAG Group, the following information will be saved when flashing from the control unit: both programming attempts via diagnosis and successfully completed programming attempts. Thus, the manufacturer will be able to check at any time, whether a vehicle is tuned or whether it is still in its original state.
Thanks to the new OptiCan Counter software, this problem is a thing of the past.
02/16/07
New software update today - All OptiCan software is now ready for Windows Vista.
Flasher version 402
Debugger version 301
Console version 102
02/09/07
All OptiCan software is now ready for Windows Vista. All our latest tests and rebuilds has gone perfect. New update is now under production
and will be released within some few days. As far as we know, are we the first flash tool on the market that works perfect with Vista.
02/02/07
New Debugger update – version 3.00 is ready!
We have made a new design like the Flasher design. And we have of course made some new ecu’s ready for Debugger.
ECU’s for :
MCC/Smart MEG 1.0 and 1.1
Volvo 2,4l Turbo with ME 7
Volvo 2,5l Turbo with ME 7
Mercedes 4 LKE & LE
On top of this, do we also today release a new Console – Version 1.01. The console is made to have all your OptiCan software in one place.
When installing this Console, you will have all the OptiCan software at your fingertips.
IMPORTANT:
Uninstall the old Debugger software before installation of new Debugger.
Install the new Debugger software – also the new Flasher and TV Free – then you install the Console. After installation of the Console, you may delete the other OptiCan shortcuts on your desktop. If you are using our standard installation directories, the Console will find them it self – if using different directories, you must adjust the paths in the Console for each program.
In the new Console, you will also find an Icon for new software that we are to release within very short time – keep updated on our news site and blog
Have a nice weekend. Downloads from our web site : www.optican.net
02/01/07
Today have we launched a Gallery on our web site. We will upload pictures of cool, special and tuned cars. Also will there be a logo partition and perhaps some other cool pictures.If you use OptiCan to tune cars with, and want us to upload a picture of it, please send a jpeg file to us at info@optican.net or if you want your company logo uploaded. Only pictures and logos from registered OptiCan users will be uploaded. Enjoy the new Gallery.
01/23/07
Warning: OptiCan and Norton Antivirus users
We hate to make warnings, but sometimes is it necessary. We have the last few weeks seen problems in flashing cars while using the latest Norton Antivirus version. There have been three incidences where Norton Antivirus has caused problem in the flashing sequence with OptiCan. We want our users to be aware of this issue, and hope that you all take care of this issue if you have Norton Antivirus installed on the computer used for flashing with OptiCan.
What Norton Antivirus does with OptiCan: Norton search in the processes for virus signatures, and since OptiCan has binary files running during the flash process, will Norton at some occasions terminate the flash process because it believe the binary files has virus.
However, no worries….there is two options for solving the issue:
1 – You can turn of the Norton virus signature scanner while working with OptiCan. Then just turn it on again after ended OptiCan session.
2 – You may just change antivirus program. There are many good antivirus systems out there, which works perfect with OptiCan…. (Check other thread about free antivirus system on Checksumm.com forum)
01/19/07
Yet another update from OptiCan - some few changes of the updating system. Users of the last 400 version may use the update button in the software - then you will get version 401.
Download is also available from : http://www.optican.net/downloads/OptiCanV401.zip
Have a great weekend!
01/17/07
New version of OptiCan software is released. Version 400 is now available. Download it here : http://www.optican.net/downloads/OptiCanV400.zip
!!!! IMPORTANT !!!!
Before installing the latest Flasher version, please uninstall the old version manually.
Instruction for manually uninstall of old Flasher version:
Start – Control panel – Add/Remove programs - Scroll down to “OptiCan Flasher” – highlight it – then click remove.
OR
Find the directory manually: OPEN : c:/programs/common files/ Then highlight the directory of Optican Flasher, push Shift+Delete for a complete erase of the directory.
If you get problems email us ASAP and we will help you. This version has several new features:
Some new ecu’s –inclusive improved read and write time for the ME9 series.
The 400 version also has the new Smart cars which only may be used with the OptiCan Dual Flasher. When using the old (black) OptiCan, the specific car will appear red, meaning not available. We advice all users to update the software ASAP, and then directly after update the OptiCan hardware.
New cool design and simplified user interface. Integrated web interface, where the user may have their own web site or the database directly shown in the software – no more need to change from software to web browser in order to upload a file.
01/05/07
There has been opened a new blog for OptiCan! There will it be released news and free spoken opinions about car related stuff – tuning, motor sport and competition. Lot of interesting software and other downloads also - http://optican.blogspot.com
01/02/07
We welcome Norsk Motorkompani as a new dealer in Asker/Drammen in Norway. Ståle Gjørstad is a well known person in the Norwegian rally environment.
01/01/07
The new international web site is now launched!! www.optican.net
12/22/06
WE ARE NOW ALMOST FINISHED WITH OUR NEW WEB SITE. WITHIN SOME FEW DAYS WILL THE NEW OPTICAN.NET SITE BE ONLINE—A SITE THAT WILL BE READABLE FOR EVERYONE NO MATTER WHAT BROWSER YOU USE
12/21/06
We welcome Champion Tuning in Korea as our new distributor in Korea. Champion is a leading tuning company in Korea, and is also importer of DynoJet dynos for Korea. www.dynojet.co.kr
11/17/06
We are glad to announce that we have got yet another well renomated dealer in Australia. VCM Tuners has taken on the task to be a main dealer in Australia and they have therefore started up a new company: OBD Tuning Australasia Pty. Ltd. www.obdtuning.com.au
11/17/06
We welcome our new dealer in Haugesund, Norway. Rune’s Max Tuning has now started their dealership. They will cover Haugesund and the areas around up to Bergen. www.maxtuning.no
11/6/06
We are back from SEMA! We where attending the stand of VW USA, where Neuspeed had one of the two project cars. Thunder Bunny is the name of the car - press release is found HERE and pics of Thunder Bunny is HERE
10/25/06
We are now going to SEMA show in Las Vegas. This year will we be found on the booth of Volkswagen USA. The reason is that one of the project cars set up by Neuspeed for Volkswagen USA, has been flashed with OptiCan. The car is a VW Jetta 2.5 v6 with a fitted turbo kit. The ecu is a Bosch ME7.1.1 CAN 40Mhz. We will come back with more information about the car during or after the show.
SEMA show starts 31. of October and ends at 3. of November. We will be found in Las Vegas from Sunday 29. of October if someone want to schedule a meeting with us outside the opening hours of the show. You are welcome to send us an email : info@optican.net
10/24/06
We have the pleasure to welcome a new dealer in Croatia -
GSM Experts Team. They are the largest special company in Croatia for all equipment and flasher tools for GSM phones, and now they are taking huge and quick steps into the car tuning world by becoming a dealer of our flasher tool OptiCan and our tuning files.
www.gsm-experts.com
09/18/06
New update—272— now improved edc16 for VAG.
OptiCan now makes sure that new software updates from VAG and the original tester do not affect the tuned software. OptiCan is first out with this - and for the time being alone with this. We will like to see how long time it takes before other hackers try to resolve this in their hacker-software !! We have also made different colors on the icons for our different software
09/15/06
We have the pleasure of welcome a new dealer in Norway.
SS Performance in Skien has just started to flash cars with our system. Their web site is: www.ssperformance.no
09/05/06
New software update—version 271 is ready. New security functions, and OptiCan will now choose automatically between EDC15p and EDC15p+ !!
08/30/06
There is now a new Debugger software available. Now do OptiCan Debugger support ME711 CAN 40Mhz for VAG. New are also SID 801, SID 803, SID 803a and SID 804 for Citroen & Peugeot
08/09/06
We have the pleasure of welcome our new distributor in Singapore : BMS Motorsports/BMS Tuning. They are well known in Singapore for their tuning of Subaru and Mitsubishi. BMS has a great track record, and they are looking forward to start marketing OptiCan Flasher in their area. BMS has all the tools at their garage to not only make standard tuning of cars, but they have a great opportunity to special tune cars with both hardware and software changes. www.bmsmotorsports.com.sg
07/25/06
Today have we released new Flasher 267 version, and Debugger 211 version. A lot of new ecu’s in both software. For the Flasher you will now find also VAG 1.6FSI & 2.0FSI. In the Debugger you will find the ME7.1.1 CAN 40Mhz ecu ! All versions are now available with driver for the new OptiCan Flasher
07/24/06
We are proud to announce a new sign up for a new dealer in Norway. In Porsgrunn, we have got a new dealer called “Bad Ass Custom”. The guys behind the company, has just started up their new store in the main street of Porsgrunn—easy to find ! Bad Ass Custom concentrate on special styling and tuning products for all kind of cars. They are a very good fit for our new OptiCan Flasher system.
07/22/06
WE HAVE NOW RELEASED OUR NEW FLASHER TOOL: OPTICAN DUAL FLASHER. PICTURE AT THE FRONTPAGE. OPTICAN DUAL FLASHER READ AND WRITE ALL THE CARS FROM THE LAST OPTICAN, BUT IT IS ALSO PREPARED FOR OTHER COMMUNICATIONS. HERE IS THE NORMS THAT THE NEW SYSTEM USE:
BDM, CAN V1.2, CAN V2.0, DUAL CAN V2.0, JATG IEE 1149.1, K-BUS, L-LINE, PWM, RS232, VPM
07/05/06
New software release today - version 266, includes now EDC16CP31-6 and EDC16C33-3. Cars is MB Viano & Vito, Smart 1,5DCI, Mitsubishi Colt 1,5DI-D
06/28/06
New software is released today—Version 265 has new functions for LOG sending. Chrysler 300C, Voyager, Cherokee and Commander diesel is now ready for use (see below for ecu types)
06/27/06
We welcome our new dealer in Oslo : Audio Art, owned by the well known Ketil Skjei. Ketil has become a very well known person for his special car stereo builds in Norway. www.audio-art.no
06/15/06
Today we have the EDC16CP31-8 for Chrysler ready. It is for Voyager2.8, 300C 3.0, Voyager 3.0, Cherokee 2.8 and Commander 3.0
06/10/06
Version 264 is ready—some changes in the EDC16 security functions
06/03/06
New software are now released—for Me7.1.1 CAN (VAG 3.2, 4.2) and DME EMS 2 for MINI !!
06/02/06
YET AGAIN ARE WE FIRST!! ME7.1.1 CAN for Audi S4, VW Golf V R32, Audi A3 3.2, VW Jetta 2.5 and Bentley are now ready!! Software update will come in few days.
05/25/06
We are happy to announce that we have got a new distributor in UK/Great Britain. Chipped UK is the main distributor for UK, and they have set up 7 new dealers in UK already. www.chippeduk.com
05/23/06
New software update of OptiCan today—Version 262, with some new RSA codes for MB, Audi and Renault
05/16/06
We welcome today our latest distributor: Now in Ukraine! - by RAL Group in Kyiv. http://ral.com.ua/optican
05/15/06
New software update today—V260 is now ready with some new Opel ecu’s attached.
05/06/06
We have now finished up the Step 3 of VW/Audi 2.0T FSI software for Hong Kong / China area. Together with some hardware changes done by our main distributor in HK - KC Racing (www.kcracing.com.hk) - are we now offering tuning steps from 250 hk up to step 3 with 275 hk and a 0-60mph on 5.9 sec.
05/05/06
New software version of the Flasher is now ready for download—version 259 have now also MB cdi for w210 (edc15xx) ready—and now also with Spanish language
05/02/06
We are happy to welcome “The Mag Wheel Centre” as our main distributor in Australia.
04/19/06
We are happy to welcome our new distributor in Lebanon: TuningEdge, Beirut.
04/18/06
The OptiCan is now ready for edc15c5 & edc15c6 for MB (w210) - the software update is right around the corner….
04/15/06
We are glad to welcome Chiptek-UK as a dealer in UK.
04/10/06
EJ Autosport in China, Guangdong, has been a dealer of OptiCan in China.
04/03/06
Audi Q7 TDI is ready !!
04/01/06
New version of Flasher and Debugger ! Flasher now also for BMW 645, AMG65, Maybach and SLR
03/04/06
We now have ready the new model of MB AMG 65 and Maybach for diagnostic flashing :-))
02/22/06
New update of the Debugger program - Bentley is ready
02/20/06
New Flasher software update - adjustments for the ME2.8 for 112 Engine from MB.
02/15/06
New Debugger update - V206 With new MS42
02/15/06
New Software update - 256 - some checksum editing on edc16 for VAG, - NEW CARS: AMG 55’s and Chrysler Crossfire and new languages is also possible.
02/10/06
New software update - Complete read and write for VW/Audi 1.9TDI, MB edc16xx and MB me2.8.1
Download
News
|